Weytoll DC 12V Voltage Detection Charging Discharge Monitor

The relay control panel features a single mode voltage detection function. The maximum trigger current is 10A (AC 277V, DC 30V), and users should not connect it with a load over DC 30V. This relay module is not suitable for lithium battery discharge. The polarity for voltage detection cannot be connected in reverse, and users should connect the wire after powering off.

The relay voltage is DC 12V, and the working power is DC 10-16V. The voltage detection range is DC 0-99.9V, with an error of +/-0.1V. The timing range is 0-999 minutes cycle. The relay has a set of transformations (normally open/normally closes), with a contract load of 10A/277V AC and 10A/30V DC. The contract resistance is ≤100mΩ (1A-6V DC). The mechanical durability is >10 million times, and the electrical durability is >100,000 times (10A-250V AC).

The standby current is 16mA 12V, with a digital display. The closed smallest current is 6mA/12V, and the relay timely current is 45mA/12V. The working temperature is -40-85°C, and the dimensions are 50 * 40 * 20mm. The weight is 27g / 0.95oz.

The package includes 1 * Relay Switch Control Module. The module provides digital display DC voltage detection and can control the relay output. The voltage limit is adjustable from 0-99.9V, and when the measured voltage is lower than the lower limit or higher than the upper limit value, the relay will work. The module can be used for voltage detection switches, battery over/under voltage protectors, or discharge meters.

The manufacturer provides a 6-month after-sales protection service. If users have any questions, they are encouraged to contact the company.

product information: